ASCOM IP-DECT IPBS1 Installation Manual page 16

Installation Guide
IP-DECT Base Station & IP-DECT Gateway
Software
The software in the BS3x0 can be updated by downloading new software without
disconnecting the equipment. The new software is stored in flash memory. For
information on how to update the software in the BS3x0, see the applicable Installation
and Operation Manual for the BS3x0.
Connectors
• Two 8-pin RJ45 modular jacks for data and powering
• A 6-pin RJ12 modular jack for factory testing
LEDs
Status of LED1 (lower LED)
Steady Green
Status of LED2 (upper LED)
Not lit
Flashing green
Steady green
Flashing amber
Steady amber
15 October 2014 / Ver. B
Description
Power LED
Description
Base station operational and no traffic on the
base station.
Fully occupied with traffic.
Base station operational and traffic on the base
station.
Software is being downloaded to the base station
Base station is OK, but not available (self-test, not
initialized, no communication with IPBL)
TD 92989EN
13