Outdoor Locations - GE Logix 764 Operation Manual

Outdoor Locations

When the water conditioning system is installed outdoors,
several items must be considered.
• Moisture – The valve and control are rated for NEMA 3
locations. Falling water should not affect
performance. The system is not designed to
withstand extreme humidity or water spray from
below. Examples are: constant heavy mist, near
corrosive environment, or upwards spray from
sprinkler.
Caution: This unit is for dry location use only unless
used with a listed Class 2 power supply suitable for
outdoor use.
• Direct Sunlight – The materials used will fade or
discolor over time in direct sunlight. The integrity of
the materials will not degrade to cause system
failures.
• Temperature – Extreme hot or cold temperatures will
cause damage to the valve or control. Freezing
temperatures will freeze the water in the valve. This
will cause physical damage to the internal parts as
well as the plumbing and conditioning resin. High
temperatures will affect the control. The display may
become unreadable but the control should continue
to function. When the temperature returns to normal
operating limits the display will re-appear. A
protective cover should assist with high temperature
applications.
• Insects – The control and valve have been designed
to keep all but the smallest insects out of the critical
areas. Any holes in the top plate can be covered with
duct tape. The top cover should be installed securely
in place.
7