Table of Contents
Advertisement
CONTENTS
Section
INTRODUCTION ............................................................ 3
TRANSPORT, STORAGE, HANDLING AND
PRODUCT IDENTIFICATION ........................................ 4
PRINCIPLE OF OPERATION ........................................ 5
INSTALLATION .............................................................. 7
ELECTRICAL CONNECTIONS ..................................... 8
ELECTRICAL REQUIREMENTS ................................ 11
RANGE AND SPAN CONSIDERATION ...................... 11
CALIBRATION ............................................................. 12
DISMANTLING AND REASSEMBLY .......................... 14
SIMPLE FAULT FINDING ............................................ 15
RETURNING FORM .................................................... 16
THE TRANSMITTERS ................................................. 17
CAPABILITY ................................................................ 20
ADDENDUM FOR PV-SCALING OPERATION ........... 25
OF THE TRANSMITTERS ........................................... 26
ON THE SECONDARY ELECTRONICS ..................... 30
FUNCTIONS ................................................................ 33
TRANSMITTERS ......................................................... 39
AND "IP" PROTECTION (EUROPE) ........................... 45
SUPPLEMENTARY DOCUMENTATION
Reference information on remote seals and configuration of
the transmitter can be found in the following documents:
SS / S6
Rev. 6
Remote Seal Specification
IM / 691HT
Rev. 1
Hand-Held Communicator
Online HELP SMARTVISION Configuration Program
INTRODUCTION
Page
The 600T series is a modular range of field mounted, micro-
processor based electronic transmitters, using a unique
inductive sensing element. Accurate and reliable
measurement of differential pressure, gauge and absolute
pressure, flow and liquid level is provided, in the even most
difficult and hazardous industrial environments.
The 600T Smart series transmitter now includes an Analog
Version (4-20 mA analog output), an Analog Version plus
HART digital communication and a Profibus DP-PA Version.
Digital communication protocols, HART and Profibus, allow
remote re-ranging, calibration and diagnostics.
With respect to HART, the bidirectional digital communication
does not have any interference with the standard 4-20 mA
analog output signal.
Profibus has a complete digital only communication.
This manual describes the features, the installation and
calibration procedures related to the 600T Series Transmitter
with HART Communication Protocol.
- 3 -
Advertisement
Table of Contents
