Table of Contents
Advertisement
Operating Hours
Displays in hours and minutes the accumulated time the monitor has been in use.
FW
Version number of the display firmware.
Defaults Menu
Factory Defaults
To return all changed parameter settings
to factory preset values, press the
button. The "Restoring Factory Defaults"
message displays while processing.
User Defaults
To save changes to default parameters in
a User Default profile, press the
button to select a User Defaults profile marked ***EMPTY*** and press the
"Saving User Defaults" message displays while processing.
To restore a User Defaults profile after changing other parameters, select the saved User Defaults profile and
press the
button. The "Restoring User Profile" message displays while processing. To clear a User Defaults
profile, select the saved User Defaults profile and press the
Profile" message displays while processing.
Image Adjustment
Brightness/Contrast Button
Press the
(Brightness/Contrast) button once to access the Brightness control. Press the button twice to
access the Contrast control, or press it three times to access the Backlight control. Press the
buttons to adjust the controls.
6 | Display User Interface
SCROLL
Brightness Control
To adjust brightness of the designated input, press the
NOTE: Setting brightness too high or too low reduces the range of shadow
and highlight detail of the displayed image.
Contrast Control
To adjust contrast of the designated input, press the
Note: Setting contrast too high or too low reduces the range of shadow and
highlight detail of the displayed image, with a negative effect on color
saturation.
Backlight Control
To adjust the backlight level of your monitor, press the
Note: Lower backlight levels increase backlight lifetime.
button to save the profile. The
(Brightness/Contrast) button. The "Clearing User
or
or
buttons.
or
buttons.
or
buttons.
Advertisement
Table of Contents
