Page 3
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. This document is subject to change without notice. NDS provides this information as reference only. Reference to products from other vendors does not imply any recommendation or endorsement.
ISO and UL/EN/IEC 60601-1 safety standards. Installation of this product shall be carried out only by NDS authorized and trained personnel. Intended Use and Contraindications Intended Use This product is intended for use in a medical environment to display high quality video and graphic images.
Power Requirements Power Supply This product complies to the listed safety standards only when used with the supplied medical grade power supply: Model BridgePower BPM150S24F06 AC Input 100 - 240 Volts, 50 to 60 Hz DC Output 24 Vdc, 6.25 A, 150 W Power Cord Use the supplied hospital grade power cord with the correct plug for your power source.
NDS neither assumes nor authorizes any person to assume for it any other liabilities in conjunction with and/or related to the sale and/or use of its products. To ensure proper use, handling and care of NDS products, customers should consult the product specific literature, instruction manual, and/or labeling included with the product or otherwise available.
Subject to the conditions set forth below, NDS agrees to repair or replace any part of the enclosed unit for the length of period indicated on the chart below:...
Page 11
If the found failure type is covered under warranty, the repair, parts, labor and shipment back to the customer will be at no charge. b. If the found failure type is not covered under warranty, NDS’s then current evaluation fee will apply in addition to the cost of parts, labor and the return shipment.
Page 12
NDS's liability is limited to the cost of repair or replacement of the product. NDS shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
Display User Interface Display Keypad The Display Keypad is centered on the lower front surface of the display enclosure, providing controls for adjustment of display parameters using the On Screen Display (OSD) Menu system. OSD Menu Overview The OSD Menu provides controls divided into 4 categories: the Picture Menu, the Color Menu, the Setup Menu, and the Input Menu.
OSD Menu Access the OSD Menu by tapping the MENU button. The OSD Menu opens displaying the Picture Menu, with details of the current Primary and Secondary inputs listed left and right across the top of the menu above the menu tabs.
Color Menu Open the Color Menu directly by tapping the COLOR button. Gamma To select a gamma setting, tap the buttons. 1.8, 2.0, 2.2, 2.4 or 2.6: Preset gamma values Video: Linear gamma Look Up Table (LUT) PACS: DICOM gamma LUT This product is capable of displaying Radiology (PACS) images for reference purposes only.
Setup Menu Menu Position: To select from 4 preset screen locations for display of the OSD menu, tap the buttons. Language: To select one of eight languages: English, Deutsch, Français, Italiano, Svenska, Español, Nederlands, or Pycckий, tap the buttons. DPMS Enable To enable or disable Display Power Management System (DPMS), tap the buttons.
Input Menu Open the Input Menu directly by tapping the INPUT button. Input Menu Overview The Primary image is designated by selection of a Primary input. The first (left) column is for designating the Primary input, indicated with the letter P. The second column contains the selection cell ( ) which is moved to the input row beneath it by tapping the SCROLL button.
Page 18
Input Searching Mode: On: Inputs will be searched in order from the last selected input and will keep cycling through the inputs until a signal is found or until DPMS is enabled – see “DPMS Enable” on page 10. Off: Input will remain set to the currently selected input regardless of presence of signal on that input. Priority: Primary input will be displayed while there is signal on the Primary input.
Description +5 Vdc Data Transmit Return Data Transmit No Connection Signal Ground 6-pin Modular RS-232 Serial Control 6-pin Modular Serial Command Adapter Cable, part number 35Z0093, is available from NDS. Name Description No Connection No Connection No Connection Receive Ground...
Power Connector and Pinout 24 Vdc Connector Name Description Ground Ground +24 Vdc Power Input Electrical Symbols Equipotentiality This symbol appears next to the display Potential Equalization Conductor (ground post). Closed (On) Switch This symbol appears on the closed, or on, side of the display On/Off switch. Open (Off) Switch This symbol appears on the open, or off, side of the display On/Off switch.
Specifications Specifications are subject to change without notice. Contact your regional NDS headquarters for current specifications using contact information on the back cover. Radiance Ultra 4K-UHD 32" Viewing Area (Diagonal) 31.55" (801.31 mm) Viewing Angle (Horizontal and Vertical) 178° Native Resolution...
Installation and Maintenance VESA Mounting This monitor is compliant with the VESA Mounting Interface Standard, with 100 x 100 mm and 200 x 100 mm MIS hole mount patterns, suitable for stand or boom mounting. Warning: Mounting bracket screws must be securely tightened. Failure to properly secure the mounting bracket to the display could be hazardous.
Electromagnetic Compatibility Tables All medical electronic devices must conform to the requirements of IEC 60601-1-2. Precautions, adherences to the Electromagnetic Compatibility (EMC) guideline information provided in this manual and verification of all medical devices in simultaneous operation are required to ensure the electromagnetic compatibility and co- existence of all other medical devices prior to a surgical procedure.
Electromagnetic Immunity Guidance and Manufacturer’s Declaration: Electromagnetic Immunity This product is intended for use in the electromagnetic environment specified below. The customer or the user of the product should assure that it is used in such an environment. Immunity Test IEC 60601 Test Level Compliance Level Electromagnetic Environment Guidance Electrostatic ±6 kV contact...
Guidance and Manufacturer’s Declaration: Electromagnetic Immunity (continued) Immunity Test IEC 60601 Test Level Compliance Level Electromagnetic Environment Guidance Portable and mobile RF communications equipment should be used no closer to any part of the product, including cables, than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter.
Oriental Media Center Suite 2302, Tower C No.4, Guang Hua Road Chao Yang District Beijing, 100026 China +86 10 8559 7859 info@ndssi.com.cn NDS Quality System ISO 9001:2008 and ISO 13485:2003 FDA Registration #2954921 60A0581 Rev A 17 November 2016...