Color Menu; Setup Menu - NDS EndoVue 19" User Manual

Video Format (Composite, SDI, S-Video only)
Auto: Examines incoming signals to automatically display the video image in NTSC or PAL format.
NTSC/PAL: Press the

Color Menu

Gamma
To select a gamma setting, press the
buttons..
1.8, 2.0, 2.2, 2.4 or 2.6: Preset gamma
values
Video: Linear gamma Look Up Table (LUT)
PACS: DICOM gamma LUT
This product is capable of displaying
Radiology (PACS) images for reference
purposes only.
Color Temperature
To select a preset color temperature, press
the or buttons.
5500, 6500, 8000, 9300: Preset color temperatures.
User: If a preset color temperature is selected, and any other parameter is subsequently changed, the resulting
values are copied to the Color Correction User presets and User is selected
Red, Green, Blue
To increase or decrease the intensity of the selected color, press the
Saturation
To set the saturation (color intensity) of the image, press the
Hue
To set the hue (color tint) of the image, press the

Setup Menu

Menu Position:
To select from nine preset screen
locations for display of the OSD menus,
press the or buttons.
Language:
To select one of 18 languages: Chinese,
Danish, Dutch, English, Finnish, French,
German, Greek, Italian,
Korean, Norwegian, Polish, Portuguese,
Russian, Spanish, Swedish, and Turkish,
press the or buttons.
DPMS Enable
To enable or disable Display Power Management System (DPMS), press the
Off: Default setting.
On: If there is no input signal, a "D.P.M.S" message displays for 10 - 15 seconds before the display goes into
Power Saving mode. The display turns on when the input signal is restored.
Auto Source Select
To disable or enable Auto Source Select, press the
Off: Video input is manually selected.
On: Searches through all possible input sources until an active video source is found.
Menu Lock
To enable Menu Lock, press the
Off: Default setting.
On: Disables access to OSD menus to prevent inadvertent changes to display settings. The OSD closes, and a
MENU LOCKED message displays briefly. To unlock OSD access, simultaneously press and hold the
buttons until a MENU UNLOCKED message displays.
SCROLL
or buttons to manually select.
or
Japanese,
button.
or
or buttons.
or buttons.
or buttons.
buttons.
or buttons.
MENU
Display User Interface | 5
and