Table of Contents
Advertisement
S
S
940A U
ELEC
ET
Turning on the
MW lamp
while calling
the station
Turning on the
MW lamp
while talking
to a covering
station
HCXTD860, Rev. A01, September 2001
G
SER
UIDE
1
Press <START>.
2
Dial the desired station number.
3
Press <CLME> when the phone is either ringing or
busy. The display confirms that the station's message
waiting lamp is turned on, and you hear confirmation
tone (three short beeps).
You also can activate message waiting when you call
a station with coverage activated, even if your call is
answered by the covering station.
Follow these steps to turn on the message waiting lamp
while talking to a covering station:
1
When you call a station that has calls covered to
another station (the covering station) within your
facility, and the covering station answers, press the
<CLME> key.
2
Your <CLME> key lamp lights, and the called
station's message waiting lamp is lit, not the lamp of
the covering station (to which you are currently
connected).
C
M
REATING A
ULTIPARTY
C
ONFERENCE
2-35
Advertisement
Table of Contents
