Receiving An E911 Alarm - Hitachi SelecSet 900 User Manual

S S 940A U
ELEC ET

Receiving an E911 Alarm

The <E911>
lamp
HCXTD860, Rev. A01, September 2001
G
SER UIDE
When someone on the property makes a 911 call, the E911
alarm lamp flashes to alert you to an emergency. Your
console may also ring distinctively.
To determine who placed a 911 call:
1 Press the <E911> key.
The display shows the number of the station user who
made the call.
If more than one 911 call was made, the E911 lamp
continues to flash.
2
Press the <E911> key until all 911 calls have been
displayed. When all 911 calls have been displayed,
the E911 lamp stops flashing.
Once a 911 call has been displayed by pressing the
<E911> key, information about the station that placed
the call is erased from the E911 alarm queue and
distinctive alarm ringing is disabled.
3 Press <START> or lift your handset to clear the
display.
R E911 A
ECEIVING AN LARM
3-11