Table of Contents
Advertisement
C
M
REATING A
ULTIPARTY
Creating a Multiparty Conference
Overview
Procedure
2-32
C
ONFERENCE
Use the following procedure to set up a multiparty
conference for up to six people.
To set up a multiparty conference:
1
While connected to one party, press <CONF>.
Dial a second party.
2
After the called party answers, press <CONF> to
create a three-party conference.
3
To add another party, press <CONF> and dial the
desired number. The two other parties are
automatically placed on hold.
4
If you misdial, press <CNCL>. This returns you to the
three-party conference. Then redial the new party.
5
To announce the conference to the new party, wait
until the called party answers and announce the
conference before pressing <CONF> to connect all
parties. Or, connect all parties by pressing <CONF>
as soon as the called party picks up.
6
Repeat these steps to add additional conferees. You
can have a total of six people in a multiparty
conference.
7
Press <CNCL> to disconnect the last person added to
the conference.Only the final person added to the
conference can be dropped by pressing <CNCL>.
Other parties must disconnect by hanging up.
8
Press <JOIN> to exit (without disconnecting the other
parties) or hang up to remove yourself from the
conference. The other parties remain connected.
S
S
ELEC
HCXTD860, Rev. A01, September 2001
940A U
G
ET
SER
UIDE
Advertisement
Table of Contents
