Table of Contents
Advertisement
S
S
940A U
ELEC
ET
Programming Autodial Keys Using FACs
Procedure
Emergency
numbers
<DISPLAY>
key
HCXTD860, Rev. A01, September 2001
G
SER
UIDE
To program an autodial key using feature access codes,
follow these steps:
1
Press <START>.
2
Dial the station speed dialing feature access code.
(See your administrator for a list of feature access
codes.)
3
Press the key you want to program.
4
Dial the station number, outside number, or feature
access code you want programmed on this key.
5
Wait for confirmation tone (three short beeps).
If you program an emergency number into an autodial key,
make sure the key is programmed correctly by making a
test call. When the called party answers, briefly explain
the reason for the call before hanging up.
If you are not sure if a key is programmed, press
<DISPLAY>. The feature access code or phone number
that is programmed on the key appears in the LCD. If the
key is not programmed, AUTODIAL is displayed. Press
<START> or lift handset to return to the normal display.
P
ROGRAMMING
A
K
UTODIAL
EYS
U
FAC
SING
S
5-11
Advertisement
Table of Contents
