Table of Contents
Advertisement
1
Introduction
4
1.1
Instructions
Important information and instructions in this documentation are designated as follows:
Danger!
Draws your attention to an exceptionally grave, impending danger to your health or life.
Warning!
!
Indicates a hazardous situation that could lead to injuries or material damage.
!
Attention!
Draws attention to possible dangers, material damage or loss of quality.
i
Notice!
Gives you tips. They make a working sequence easier or draw attention to important working processes.
Environment!
Gives you tips on protecting the environment.
Handling instruction
Reference to section, position, illustration number or document.
Option (accessories, peripheral equipment, special fittings).
Information in the display.
Zeit
1.2
Intended Use
•
The device is manufactured in accordance with the current technological status and the recognized safety rules.
However, danger to the life and limb of the user or third parties and/or damage to the device and other tangible
assets can arise during use.
•
The device may only be used for its intended purpose and if it is in perfect working order, and it must be used with
regard to safety and dangers as stated in the operating manual.
•
The device applicator mounted on a cab printer of the A+ or A series is intended exclusively for applying suitable
materials that have been approved by the manufacturer. Any other use or use going beyond this shall be regarded
as improper use. The manufacturer/supplier shall not be liable for damage resulting from unauthorized use; the
user shall bear the risk alone.
•
Usage for the intended purpose also includes complying with the operating manuals of applicator and printer,
including the manufacturer's maintenance recommendations and specifications.
i
Notice!
The complete documentation can also currently be found in the Internet.
1.3
Safety Instructions
!
Attention!
Initiation, adjustments and changing of parts is only for qualified service personal only.
Initiation/ Service Manual Applicators
Warning!
!
This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
•
Before mounting the delivered components disconnect the printer from the power supply and close the shutoff
valve at the applicator.
•
Only connect the device to other devices which have a protective low voltage.
•
Switch off all affected devices (computer, printer, accessories) before connecting or disconnecting.
•
In operation, moving parts are easily accessible.
This applies especially for the zone, where the pad is moved between the starting and the labelling position.
During operation do not reach into that zone and keep long hair, loose clothes, and jewelry distant. Before any
manipulations in those areas, close the shutoff valve.
•
The device may only be used in a dry environment, do not expose it to moisture (sprays of water, mists, etc.).
4
Advertisement
Table of Contents
