Table of Contents
Advertisement
10
Declaration
30
10.1
Declaration of Incorporation
We declare herewith that the following „partly completed machinery" as a result of design, construction and the version
put in circulation complies with the essential requirements of the Directive 2006/42/EC on machinery :
Annex I, Article 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.3.2, 1.5.2, 1.5.8, 1.6.3, 1.7
In the event of any alteration which has not been approved by us being made to any device as designated below, this
statement shall thereby be made invalid.
Device:
Type:
Applied EU Regulations and Norms:
Directive 2006/42/EC on machinery
Person authorised to compile the technical file :
Signed for, and on behalf of the Manufacturer :
cab Produkttechnik Sömmerda
Gesellschaft für Computer-
und Automationsbausteine mbH
99610 Sömmerda
The product must not be put into service until the final machinery into which it is to be incorporated has been declared in
conformity with the provisions of the Directive on machinery
The documents according annex VII part B from the incomplete machinery are created and will commit to state agencies
on request in electronic kinds.
Declaration of Incorporation
cab Produkttechnik
GmbH & Co KG
Wilhelm-Schickard-Str. 14
D-76131 Karlsruhe
Deutschland
Applicator
A1000
•
EN ISO 12100:2010
•
EN ISO 13849-1:2015
•
EN 60950-1:2006
+A11:2009+A12:2011+A1:2010+A2:2013
Erwin Fascher
Am Unterwege 18/20
99610 Sömmerda
Sömmerda, 04.10.2017
Erwin Fascher
Managing Director
30
Advertisement
Table of Contents
