Rigging Procedures; Attaching An Sb18 To A Second Element - L-Acoustics SB18 Rigging Manual

4 4 4 4

RIGGING PROCEDURES

RIGGING
RIGGING RIGGING
A.

Attaching an SB18 to a second element

At the four corners:
Remove the pin from the SB18.
Rotate the corresponding rigging arm so that it sits in the rigging track of the adjacent enclosure.
Insert the pin through both the rigging point of the second element and the SB18 rigging arm.
Attaching two SB18 enclosures together
Attaching the bottom SB18 to the stacking platform
SB18_RM_EN_1-0
PROCEDURES
PROCEDURES PROCEDURES
PROCEDURE A (4 different scenarios)
3 3 3 3
2 2 2 2
2 2 2 2
1 1 1 1
1 1 1 1
1 1 1 1
2 2 2 2
3 3 3 3
w w w . l - a c o u s t i c s . c o m
Attaching the M-BUMP flying structure to an SB18
Attaching the KARA-MINIBU flying structure to an SB18
3 3 3 3
2 2 2 2
1 1 1 1
a
3 3 3 3
a
2 2 2 2
1 1 1 1
9 9 9 9