System Set-Up; Ground-Stacking - L-Acoustics SB18 Rigging Manual

Hide thumbs Also See for SB18:
Table of Contents

Advertisement

3 3 3 3
SYSTEM SET
SYSTEM
SYSTEM
SYSTEM
Dismantling an array
Apply the associated set-up procedure in reversed order.
Independent or mixed
This document only deals with independent rigging of the SB18 subwoofer enclosure.
When using the SB18 enclosure as a companion to a main system, some combined configurations will imply
the set-up of mixed arrays. At this point, it is especially the case of KARA/SB18 arrays. Always refer to the
rigging manual of the main system or enclosure to get acquainted with the rigging procedures specific to the
mixed main/sub arrays.
Cardioid configuration
The cardioid configuration is in an array of 4 subwoofers with 1 reversed element.
Refer to the subwoofer user manual for details about the CARDIOID operating mode.
Any of the following arrangements can be set in cardioid configuration.
3.1

Ground-stacking

Option 1: Stacked on the floor
Place and attach the enclosures on
top of each other (logo down)
Refer to PROCEDURE A
SB18_RM_EN_1-0
SET- - - - UP
UP
SET
SET
UP
UP
Set vertical stacks, side by side, one after the other, by placing and
attaching the SB18 enclosures on top of each other (logo down)
Refer to PROCEDURE A
Horizontal
Place the SB18 enclosures side by side
w w w . l - a c o u s t i c s . c o m
Vertical
Option 2: Platform-stacked
Block
Prepare the M-BUMP
stacking platform
Refer to PROCEDURE B
Place and attach a first SB18
(logo up) to the platform
Refer to PROCEDURE A
Place and attach the enclosures
(logo up) on top of each other
Refer to PROCEDURE A
On-end
7 7 7 7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents