Flying - L-Acoustics SB18 Rigging Manual

SB18 SUBWOOFER SB18 SB18 SB18
rigging manual rigging manual
rigging manual rigging manual
VERSION 1.0
3.2

Flying

Truss clamping
By installing a CLAMP250 instead of a shackle, an array can be attached to a truss. Refer to PROCEDURE D.
Choose the flying option before rigging the system
Identify the appropriate flying option and rigging hole(s) by modeling the system in SOUNDVISION, and refer
to APPENDIX A for M-BUMP flying structure or APPENDIX B for KARA-MINIBU flying structure.
Assemble a stack of 2 SB18 enclosures (logo down) under the motor location
Attach the M-BUMP frame to the top SB18 enclosure, with laser slits towards the audience
Prepare the M-BUMP flying structure
Attach the motor hook to the shackle(s) on the M-BAR
Raise the array so that it is possible to place another stack of two SB18 under it
Assemble a stack of 2 SB18 enclosures (logo down) under the motor location
Lower the array until it rests on the new stack
Attach the bottom SB18 enclosure of the first stack to the top SB18 of the new stack
To add more enclosures, repeat the previous 4 steps until the array is completed
Raise the array
Prepare the KARA-MINIBU flying structure
Assemble a stack of 2 SB18 enclosures (logo down) under the motor location
Attach the KARA-MINIBU on the top SB18 enclosure, in front or rear extension
(refer to the chosen rigging option)
Attach the motor hook to the shackle(s) on the KARA-MINIBU
Raise the array so that it is possible to place another stack of two SB18 under it
(for 2 SB18 only, directly raise the array to its final height and end the procedure)
Assemble a stack of 2 SB18 enclosures (logo down) under the motor location
Lower the array until it rests on the new stack
Attach the bottom SB18 enclosure of the first stack to the top SB18 of the new stack
SB18_RM_EN_1-0
Vertical with M-BUMP
Refer to PROCEDURE A
Refer to PROCEDURE A
Refer to PROCEDURE C
Refer to PROCEDURE A
Refer to PROCEDURE A
Vertical with KARA-MINIBU
Refer to PROCEDURE D
Refer to PROCEDURE A
Refer to PROCEDURE A
Refer to PROCEDURE A
Refer to PROCEDURE A
Raise the array
w w w . l - a c o u s t i c s . c o m
8 8 8 8