DataCard CR500 Quick Install Manual page 7

e. Power on the printer. The Film
Search A1 message displays.
f. At the Print Unit front panel, run
the cleaning card:
i. Press Menu to display
Cleaning.
ii. Press Enter to display Rollers
OK.
iii. Press Return to display
Film checking followed by
Cleaning Start OK.
iv. Press Return.
The Print Unit pulls the cleaning
card into the Print Unit and
cleaning begins. The card is
discharged and Cleaning Start
OK displays.
g. Run the card a second time
i. Turn the cleaning card over
and place it in the Exception
slide with the sticky side
facing down. Follow step 5d
to position the card correctly.
ii. Repeat step 5f to run the
card.
The Print Unit pulls the cleaning
card into the Print Unit and
cleaning resumes.
CR500 Instant Issuance System
CR500 Instant Issuance System Quick Install Guide
Use a cleaning card one time only.
Using a dirty one can damage the
rollers.
h. Reinstall the retransfer film
i.
j.
iii. When the cleaning card is
discharged, press Exit to end
the cleaning process.
cartridge.
Close the Print Unit.
On the Print Unit front panel,
press Exit to return to the top
level of the menu system.
5