Table of Contents
Advertisement
Card Storage
These guidelines apply to both blank card stock and processed cards.
Use cards that are at room temperature. If cards are stored in a cooler environment than the
printer, allow them to reach room temperature before using them.
Stack cards so that they will not shift and rub against each other.
Make sure that the magnetic stripe on one card does not come in contact with the magnetic
stripe on another card.
Make sure that cards with magnetic stripes are stored away from magnetic objects.
Store cards in a cool, dry, and dark place. Excessive light can cause yellowing of cards on
exposed edges.
Store cards in their original packaging.
Cleaning Supplies
For best results, keep additional cleaning supplies on hand.
The following cleaning supplies are available:
Supply
Cleaning cards
Cleaning sleeves
Cleaning swabs
Foam fan filter
Card Inspection Gloves
CR825 and CE875 Instant Issuance System Installation and Administrator's Guide
Part No.
Description
558436-002
Pack of 10 double-sided, adhesive-coated
cleaning cards used to clean the printer
card track and transport rollers.
569946-001
Pack of 5 adhesive-coated cleaning
sleeves.
507377-001
Pack of 5 isopropanol-saturated cleaning
swabs for cleaning debris and dust from
the printhead and from hard-to-reach
internal areas of the printer.
514267-001
Replacement filter for the rear door fan.
Change the filter at least once a year.
510034-001
Pack of 100, powder-free, with no natural
rubber latex.
101
Advertisement
Table of Contents
