Read Bar Codes - Intermec CK70 User Manual

Chapter 1 — About the Computer Features

Read Bar Codes

Depending on the imager model in your computer, you can read 1D
and 2D bar code symbologies, composite symbologies, and postal
codes.
You can also connect the computer to cordless scanners (like the SF51
and SR61) through Bluetooth communications or tethered scanners
(like the SR30 and SR61T) through the RS-232 adapter. For help, see
"Connect to a Bluetooth Scanner" on page 84
Tethered Scanner" on page
Predefined Mode
1D
1D and 2D Standard
1D and 2D Bright Environment
1D and 2D Reflective Surface
Note: You can also select the imager predefined mode in Profile
Settings by tapping Start > Profile Settings > Scanning.
28
1 Enable only the bar code symbologies that you need.
2 Use Intermec Settings to select the predefined imager mode that
best suits your environment:
3 Point the imager window at the bar code label, and hold the
computer steady a few inches from the label.
4 Press the Scan button. The laser pointer and illumination beam or
frame appear.
and
88, respectively.
For Scanning
Only 1D labels.
(Default) All types of bar code labels.
In high ambient light, such as outdoors
in the sunshine.
Glossy labels.
70 Series Mobile Computer User Manual
"Connect to a