FX
-128ASL-M User's Manual
3U
3.6
Automatic address detection
Automatic address detection is a function to store the IDs (addresses) of the connected slave modules in the
EEPROM of the 128ASL-M.
Parameters of connected devices are automatically updated after IDs are stored to EEPROM and after
detection of unset IDs (addresses) and duplicate IDs (addresses).
The ID (address) information stored in the EEPROM is held even when the power is turned OFF. However,
information about unset IDs and duplicate IDs and the ASLINK parameter information of each slave module
are not held.
For details on the automatic address detection, refer to the Subsection 6.2.3.
28
3 System Configuration
3.6 Automatic address detection