Mitsubishi Electric FX3U-128ASL-M User Manual page 43

FX -128ASL-M User's Manual
3U
a) Constants related to the non-isolated slave module (Ihin, Iho)
In the non-isolated slave module, the current required for the internal control circuit and the connected
load is supplied by transmission cables (DP, DN).
Ihin(A) = Current consumption of the non-isolated input module
= Internal current consumption of the non-isolated input module + Current consumption of
Iho(A) = Current consumption of the non-isolated output module
= Internal current consumption of the non-isolated output module + Current consumption of
128ASL-M
24V 0V
24V 0V
24 V DC
external
power supply
Caution
• The 24VL and 0VL terminals of a slave module are used to supply power to the connected load.
• For the current consumption of a non-isolated slave module, refer to the manual for each slave
module.
connected load (three-wire sensor) × Number of points
connected load × Number of points
DP
DP DN
5.5 Power supply details to the AnyWireASLINK system
Non-isolated slave module
Control circuit
Power supply
generation
DN 24VL 0VL 0
Connected load
5 Wiring, Power-ON/OFF Timing
1 n
1
2
3
4
5
6
7
8
9
A
37