Newco CX-3 Operation Manual page 12

Programming Instructions (Cont'd)
Pressing the "COFFEE-MILD" Button will select the Mode Displayed
Pressing the "LATTE" Button will scroll forward through the Select Menu Choices
Pressing the "CAPPUCCINO" Button will scroll backwards through the Select
Menu Choices
Pressing the "LATTE" button repeatedly will loop the display in 4 Modes:
Maintenance---Statistics---Setup--- ---Exit Program Mode
Maintenance
Water Filter Remaining* *NOT SHOWN IF NOT USING A WATER FILTER
Water filter Reset (Select this after changing filters to reset water filter countdown)*
Whipper Seal Remaining (Remaining powdered drink cycles before changing the whipper seal)
Whipper Seal Reset (Select this after changing the whpper seal to reset whipper seal countdown
Exit Maintenance Mode
Statistics
1. Press Button to Select "Maintenance"
2. Press "LATTE" Button to toggle Select Menu display
REPLACEMENT WHIPPER SEAL PN 781566 SEE PAGE 23
1. Press Button to Select "Statistics"
2. Press "LATTE" Button to Toggle display forward
Total run cycles on machine
Pod brew cycles, re-settable
Total Gallons water used
Chocolate Powder Remaining
Milk Powder Remaining
Waste Bin Contents
Exit Statistics Mode
Information Display Only
(Not shown if Powder
Tracking is turned 'OFF')
12