Monterey 180 FS Owner's Manual page 23

Back to Back Lounge Seating
To adjust seat position forward or aft:
1. Turn lever in figure 3 clockwise to release rack teeth and hold, moving
seat forward or aft until in desired position. Return lever to original up &
down position to lock position. Ensure at least 2 rack teeth are engaged.
To change from upright position (figure 1) to lounge position (figure 2):
1. Turn lever in figure 3 clockwise to release rack teeth. Hold & Pull lever
toward front of boat while lifting up on seat bottom, releasing both tabs
(figure 1) until seat pulls freely and move seat into lounge position.
2. To secure headrest (aft) in angled position, push brackets in figure 4 into
locked position as shown in figure 5.
To change from lounge position (figure 2) to upright position (figure 1):
1. Push seat back into almost* upright position. While holding one end,
slide the other end with a quick motion, exerting some pressure until seat
snaps into place (tab inside framework shown in figure 1 will drop back
into place).
2. Ensure lever in figure 3 is in the up/down position.
*Leave an approximate 6 inch gap at bottom of seat back.
M-16
Figure 1
Figure 3
Figure 4
Figure 2
Figure 5