Fresh Water Tank - Monterey 180 FS Owner's Manual

FRESH WATER TANK

The fresh water tank is filled through the deck plate filler marked "WATER."
The tank is vented through the combination water fill/vent fitting; this allows air
to enter/escape as water levels rise and fall. The water tank is full when water
comes out of the fill/vent fitting.
Fill the tank only with potable water. Using and refilling the tank
often will help keep it a source of clean drinking water.
To fill the tank:
1. Insert the filler cap (special) key provided with your boat.
2. Insert the key into the slot in the cap and turn counterclockwise to unlock.
3. Remove the cap.
4. Using a sanitary drinking water hose (blue or white), fill the tank with
clean, fresh drinking water.
5. Replace the cap and lock into position with the key.
Filter and Pump
Water is drawn from the tank by a self-priming pump located in the engine
area. Before entering the pump, the water passes through a filter to capture
any solid contaminants. The pump provides a flow of water at a preset
pressure to the remainder of the system.
M-10
Notice
TYPICAL DECK PLATE KEY
PUMP
PRESSURE
INLET
SWITCH
PUMP
OUTLET
FILTER
HOUSING
TYPICAL FRESHWATER PUMP
KC-2047
WATER
HOSE
(FROM
TANK)
KC-2042.1