Sharp MX-2640N Technical Manual page 60

IMAGE SEND COMMUNICATION ERROR
Report Code 2
29
30
31
32
33
34
35
36 In dialling, polarity reversion detection (Remote machine not responding)
37
38
60
In resend of document filed data, setting to inhibit resolution conversion is made.
61
62
63
In resending data of document file, during conversion for resending, the number
64 of IMS management pages exceeds the upper limit (999). (IT occurs in OSA Scan to
70
71
72
73
74
An authentication of the POP server is failed when POP before SMTP is enabled.
In the setting of SSL communication, when SSL communication is tried but the
75
76
80
81
The attached file of received e-mail is not of TIFF type which is supported.
82 The TIFF type of the attached file in received e-mail cannot be recognized. ID error
83 The TIFF type of the attached file in received e-mail cannot be recognized.
The TIFF type of the attached file in received e-mail cannot be recognized.
84
The TIFF type of the attached file in received e-mail cannot be recognized.
85
The TIFF type of the attached file in received e-mail cannot be recognized.
86
The TIFF type of the attached file in received e-mail cannot be recognized.
87
The TIFF type of the attached file in received e-mail cannot be recognized.
88
In e-mail receive; an attached file cannot be stored in memory. Memory over.
90
91
92
When sub code 2 is 08 or 30 and the communication report is OK, the report code is 00 or 16.
60
Communication Interruption Content
A communication error is generated between MFP controller and
Modem controller. (Report code is 0 or 16.)
DC current not detected (busy)
Dial tone not detected (busy)
Busy tone detection (busy)
T0 time up (Remote machine not responding)
T1 time up (Remote machine not responding)
Calling is not made (busy)<Collision detected (including CNG detection)>
In resend of document filed data, an error occurs in decoding or coding.
(The resolution after resend is set to be Enlarged.)
In resend of document filed data, rotation setting is made for data which
In resend of document filed data, data cannot be stored in HD
after conversion of resolution for resend.
FTP also, resulting in memory over.)
E-mail header acquisition error
Time out occurs during e-mail receive.
Receive reject occurs during e-mail receive.
Network communication cannot be made due to port disable.
server side does not support SSL.
There is no image in network communication (transfer).
There is no attached file in received e-mail.
Cannot be stored in memory.
In e-mail receive, an attached file cannot be stored in memory.
The file size is too great to be stored in memory.
In SMTP e-mail receive; an attached file cannot be stored in memory.
Cannot be stored in memory.
Not used
Not used
cannot be rotated.
Version error
Tag data error
Tag parameter error
Header size error
Data error
SHARP
Send / Receive
—
—
Send
Send
Send
Send
Send
Send
Send
—
Resend
Resend
Resend
Resend
Resend
OSA Scan
To FTP
E-mail receive
E-mail receive
E-mail receive
Network send
Network send
Network send
Network send
E-mail receive
E-mail receive
E-mail receive
E-mail receive
E-mail receive
E-mail receive
E-mail receive
E-mail receive
E-mail receive
E-mail receive
E-mail receive
E-mail receive