Sharp MX-2640N Technical Manual page 17

SHARP
300/360K MAINTENANCE SCHEDULE (CONT'D):
MX2640N MX3140N MX3640N
Every Every
300K 300K
Every Fuser Section:
360K In addition to Total/Colour/Fuser/Transfer maintenance if indicated:-
Replace Fusing Belt Kit (MX-361FB)
Replace Pressure Roller Kit (MX-230LH)
Check & Clean Upper and Lower Thermistors.
Check/Clean/Replace Fuser Separator Pawls.
Sim 24-04
Transfer Section:
Replace Secondary Transfer Belt Kit (MX-230B2).
Sim 24-04
Description
 Fusing Belt
 Meandering Suppress Collar x 2
 Pressure Roller
 Fusing Roller
Clear Fusing Belt Counter.
Clear Fusing Roller Counter.
Clear Press Roller Counter.
Clear Fusing Load Counter.
Clear Separation Pawl Counter.
Clear Separation Plate Counter.
Clear Fusing Web Counter.
Clear TC2 Belt Counter.
MAINTENANCE
17