Maintenance - Sharp MX-2640N Technical Manual

MAINTENANCE

Maintenance Indications:
Black Drum (Counter) has reached
DK
Cyan Drum (Counter) has reached
DC
Magenta Drum (Counter) has reached
DM
Yellow Drum (Counter) has reached
DY
Black Developer (Counter) has reached
VK
Cyan Developer (Counter) has reached
VC
Magenta Developer (Counter) has reached
VM
Yellow Developer (Counter) has reached
VY
Fusing Belt Print Counter has reached the
FK1
Fuser Pressure Roller Print Counter has
FK2
Fuser Web Cleaner (Counter) has reached
FK3
(Pop Up FK3 Error – Web End Detected)
Primary Transfer Unit Counter has reached
TK1
Secondary Transfer Unit Counter has
TK2
TA
CA
AA
Starting Powder:
The following starting powder should be applied to the relevant consumable item during maintenance:-
Starting Powder
MX-2640N
MX-3140N
MX-3640N
Note: The Yellow Toner used for Start Powder (Primary Transfer Belt only) is the same as MX-31GTYA.
CAUTION:
Do not apply Stearic Acid (UKOG-0312FCZZ), Strontium Titanium (UKOG-0316FCZZ) or Titanium
Hydroxide (UKOG-0322FCZZ) starting powder to the Primary Transfer Belt.
14
the specified life.
the specified life.
the specified life.
the specified life.
the specified life.
the specified life.
the specified life.
the specified life.
specified limit.
reached the specified limit.
the specified limit
the specified limit.
reached the specified limit.
Maintenance [All] Counter has reached specified limit
Maintenance [Colour] Counter has reached specified limit
Maintenance [All] & [Colour] Counters have reached the specified limits
Replace Black Drum
Replace Cyan Drum
Replace Magenta Drum.
Replace Yellow Drum.
Replace Black Developer.
Replace Colour
Replace the Fusing
Replace the Pressure
Web Cleaning Kit
Replace Primary Transfer
Belt and Blade kits.
Replace the Secondary
Transfer Belt Kit.
OPC Drum
UKOG-0312FCZZ
[Stearic Acid]
Developer Kit.
Belt Kit.
Roller Kit.
Replace the
Primary Transfer Belt
CKOG-0345DS51
[Yellow Toner]
SHARP
Process
Section
(Drum)
Process
Section
(Developer)
Fuser
Section
Transfer
Section