Sharp MX-2640N Technical Manual page 11

SHARP
PERIPHERAL / OPTION CONFIGURATION
FAX OPTION – MX-FX11
Sim 66-02
Sim 66-10
Sim 66-39
FINISHER OPTION – MX-FN10, MX-FN17
Sim 03-10
Sim 26-65
EXTERNAL ACCOUNTING MODULE – MX-AMX3
Sim 55-03
Sim 55-03
Sim 55-03
MFP DATA BACKUP
Sim 22-06
Device Clone & Storage Backup.
Sim 56-01
Fax SW Setting (Destination).
Fax Memory Clear (For Extended Memory).
Fax Destination Set.
Saddle Fold/Staple Position Adjustment [MX-FN10 only]
Finisher Alarm Mode:-
Limit number of Copies in staple mode (ON/OFF).
Auto clear function before Copy job execution:-
SSW 1-5 0 = Disable, 1 = Enable.
USB Card Reader detection control:-
SSW 6-8 0 = Disable, 1 = Enable.
Continuous print mode (job queuing for OSA):-
SSW 24-7 0 = Disable, 1 = Enable.
Data Simulation Print.
Backup EEPROM Data to HDD.
INITIAL SETUP
11