Selecting First Stage Heating And Cooling Differential Option - Jackson Systems T-32-TS Installation Manual

INSTALLER SETUP MENU
SELECTING FIRST STAGE HEATING AND COOLING DIFFERENTIAL
OPTION
Menu 11 is used to adjust the heating and cooling differential. The factory default
is 1 ( 1°F). This represents the temperature above the cooling setpoint or below
the heating setpoint when the equipment is energized. Touch the
arrows to change the differential.
Back
1 = 1°F Differential
2 = 2°F Differential
3 = 3°F Differential
32
UP or
Next
DOWN