Testing; Fan Operation; Conventional Heating; Conventional Cooling - Jackson Systems T-32-TS Installation Manual

TESTING

FAN OPERATION

Touch Mode until the word
On appear. After a brief moment, the internal fan relay 'G' will energize and the
system fan should operate. Touch
After a brief moment, the internal fan relay will de-energize and the system fan
will shut off.

CONVENTIONAL HEATING

Touch Mode until the word
setpoint above the space temperature and the first stage differential. After a brief
moment, the internal heating relay 'W1' will energize and the heating system
should operate. The word
configured for two stage heating, raise the setpoint above the second stage
differential and Heat 2
Touch Mode until the word

CONVENTIONAL COOLING

Touch Mode until Cool
below the space temperature and the first stage differential.
OFF is displayed. Touch FAN until the words
FAN again until the word
Heat appears. Touch the
Heat will flash continuously. If the thermostat has been
will flash indicating the 'W2' heating relay is energized.
OFF is displayed.
appears. Touch the DOWN
43
Always
Automatic appears.
UP arrow and raise the
arrow and lower the setpoint