JLG 19AMI Operation And Safety Manual page 26

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
1. Wheels and Casters - Properly secured, wheels and
casters turn freely and are properly lubricated. Check for
any visible damage.
2. Floor Brake - Properly secured to frame, no visible
damage (cracks, distortion, etc.) and is functioning
properly.
3. Base Frame - No visible damage; components properly
secured, no loose wires dangling below base; bubble
level in place and functioning properly.
4. Manual Descent Control Valve - Properly secured, no
loose or missing parts, no visible damage.
5. Battery Box/Charger Installation - (DC Machines)
Proper battery electrolyte level, cables secure, no dam-
age or corrosion.
6. Motor/Pump/Reservoir Unit - All properly secured, no
visible damage, no evidence of hydraulic leaks. Check
that hydraulic reservoir fluid level is filled to the "Fill to
Line" mark on the side of the reservoir.
7. Ground Controls - Key switch operable, no visible dam-
age; placards secure and legible; emergency stop
switch, no visible damage and properly set for opera-
tion.
8. Mast Installation - Mast sections properly secured, no
visible damage to mast sections, no loose or missing
2-6
parts, slide pads properly secured. Mast chains and
cables properly secured, lubricated and undamaged.
Sequencing cables properly secured and undamaged.
Sheaves and pins are properly secured, have no visible
damage, no loose or missing parts and are lubricated.
9. Platform Controls - Up/Down and Function Enable but-
tons properly secured, no loose or missing parts, no vis-
ible damage. Placards secure and legible, emergency
shut-off button set for operation. Control markings legi-
ble; Operators manual enclosed in manual storage tube.
10. Guard Rail Installation - All railings securely attached,
no visible damage, no missing parts; sliding entry bar in
proper working order. Platform gate/slide bar working
properly, no visible sign of damage (if so equipped).
11. Platform Assembly - Secure to mast; no loose or miss-
ing parts, no visible damage. Control and power cables,
no visible damage; cables properly tensioned and
seated in control cable sheaves; control cable sheaves
not damaged and rotate freely.
Mast chains and cables properly secured, lubricated and undam-
aged. Sequencing cables properly secured and undamaged.
– JLG Lift – 3121189