Option Selection; Error Signalling; Channel List - Tv/Radio - Kathrein UFS 710si Operating Manual

the channels using the
channel directly using the

OPTION SELECTION

Press the (yellow) button once (twice for portal
channels) to view further soundtrack selection options,
if these are transmitted by the channel provider. Use
the buttons to scroll through the available
selection options. Pressing the
again, or pressing the
again.

ERROR SIGNALLING

"No or bad signal" indicates that an error has occurred in the reception system or in the receiver settings,
or that the transponder is not transmitting.
Check the Sat IF connection and the LNB confi guration. If you have changed settings, compare them
against the basic settings (provided you had made a note of them as suggested).
CHANNEL LIST – TV/RADIO
Also pay attention
bars at the bottom of the on-
screen display! These provide
information on what to do next.
Press the button to access the
channel list.
Calling this up displays the channel selection/sorting list from which you selected the last channel.
At the top right you will see the selected channel list (TV or radio channels) displayed.
Press the (blue) button to switch between the TV and radio channel lists.
36
ON-SCREEN DISPLAYS (OSD)
and buttons. You can also however select the sub-channels of a portal
buttons, without having previously pressed the
(yellow) button
button exits this display
to the
(yellow) button.