Controls, Displays And Connections; View Of Front Panel (Flap Folded Down); View Of Rear Panel - Kathrein UFS 902 Operating Manual

CONTROLS, DISPLAYS AND CONNECTIONS

This section provides a brief description of all the controls, displays and connections. The button symbols
presented here can also be found in the description of the operating steps.

VIEW OF FRONT PANEL (FLAP FOLDED DOWN)

VIEW OF REAR PANEL

Front panel controls and displays
1. Common Interface for one CA module
for pay TV cards *
2. Stand-by button
3. TV/R button
4. Display
5/6. Arrow buttons for changing channel
)
*
The CA module and pay TV cards are
not included
)
(behind the fl ap)
USB 2.0
5V... 500 mA max
Rear panel controls and displays
1. On/Off switch (with mains disconnect)
2. Mains power cable
3. RS 232 port (for Service only)
4. Optical data stream output (SPDIF/
Sony Philips Digital Interface Format) for
Dolby Digital AC 3 audio
5. USB 2.0 port (USB-A connector)
6. HDMI socket for connection to a TV set
7. 2 x Cinch plug audio outputs (L/R)
8. Cinch plug video output (composite colour)
9. 3 x Cinch connections for component outputs YUV
labelled = Y/Pb/Pr
10. Scart socket for TV connection
11. 2 x SAT-IF connections (input above/
loop-through output below)
7