Controls, Displays And Connections - Kathrein UFS 702si Operator's Manual

Controls, displays and connections

View of front panel (fl ap folded down)
View of rear panel
Front panel controls and displays
1. On/Off switch (with mains disconnect)
2. TV/R button for switching between TV
and radio mode
3. 16-character alphanumeric display for
channel names, radio data etc.
4. Channel down button
5. Channel up button
Data cable
Receiver modular
socket ( ) Connection
sequence
Pin 6 = RXD
Pin 5 = TXD
Pin 2 = GND
This section provides a brief description of all the controls,
displays and connections. The button symbols presented
here can also be found in the description of the operating
steps.
Rear panel controls and displays
1. LNB input
2. LNB loop-through input
3. Electrical data stream output (SPDIF/
4. Optical data stream output (SPDIF/
5. Audio outputs (L/R) - cinch sockets
6. Scart socket for TV connection
7. Scart socket for VCR connection
PC Connection 8. 6-pin modular socket with RJ 11 port for
sequence
9. Mains power cable
RXD
TXD
GND
Sony Philips Digital Interface Format)
for Dolby Digital AC 3 audio
Sony Philips Digital Interface Format)
for Dolby Digital AC 3 audio
serial data transfer in service mode or
connection for remote infrared receiver
7