Running And Stopping - 3M SD-200 User Manual

4 Operating

Running and stopping

The run and stop keys are used to start and stop the Run-Time
measurements which include: L
Alert , M
1. While powered on, press
Note: While in run mode, the settings cannot be changed. (See "Settings" for

more information.)
2. To stop, press
Viewing measurements
The mode key is used to view each measurement screen with its related value.
There are six measurement screens:
M *, M *, LED alert
AX IN
occurred).
Measurement screen examples
(1) SPL screen (2) L
1
4
, and M screens.
AX IN
key. The
*, and Run-time
Integrating
Run indicator and L
Mode key
The mode key cycles through the measurements
/L (3) LED Alert
EQ AVG
Figure 1-5: Measurement screens
/L (see Table 1-2 for more information), LED
EQ AVG
key. The icon appears.
icon disappears.
SPL (no measurement indicator), L
* screens (*while integrating has
displayed
EQ
(4) M (5) M
AX
2
5
for integrating
EQ
(6) Run-Time
IN
3
6
/L ,
AVG*