Clearing The Current Route From The Screen - Raymarine GPS Plotter Owner's Handbook Manual

3-28
Route Leg and Waypoint Information
➤
To display information about a route leg, move the cursor over the leg
until the letters RTE appear. The Route Leg data box is displayed, together
with the Follow Route soft keys as shown in Figure 3-34.
Note: If a route is being followed, the FOLLOW ROUTE soft key changes to
STOP FOLLOW .
To remove the data box, move the cursor away from the route or press
CLEAR .
➤
To display information about a route waypoint, move the cursor over the
waypoint until the letters WPT appear. The Waypoint Data Box is
displayed with the Follow Route soft keys as shown in Figure 3-35.
The Waypoint can be edited by means of the associated soft keys, see
Editing Waypoint Details on page 3-18.
To remove the data box, move the cursor away from the waypoint or
press CLEAR .

Clearing the Current Route from the Screen

If the current route has not been saved, you have the option of saving it; if
you are following the current route, you have the option to stop.
➤
To clear the current route, either:
1. Place the cursor over a route leg until the text RTE is displayed.
Figure 3-34: Route Leg Data Box and Soft Keys
Figure 3-35: Waypoint Data Box and Soft Keys
The Route soft keys are displayed as shown in Figure 3-34.
Raynav 300 GPS Plotter
D4912-1
D4960-1