Installing The Heat Shield - Air Lift LoadLifter 5000 Ultimate Installation Manual

INSTALLING THE HEAT SHIELD

NOTE Finished photo of heat shield installed on right-side (passenger) exhaust (fig. 34).
1 . Bend the tabs on the heat shield to provide a 1/2" dead air space between exhaust pipe
2. Attach the heat shield to the exhaust pipe using the clamps (fig. 36). Bend the heat shield
16
and heat shield (fig. 35).
for maximum clearance to the air spring .
Distance from
heat shield to
bellows must
be at least 1/2"
LoadLifter 5000 Ultimate
Bend tabs up
At least 1/2" of
dead air space
"
1/2
fig. 36
fig. 34
fig. 35
MN-944