Installation Weight & Dimensions - Canon Oce VarioPrint 135 Service Manual

Table 17 – Power Receptacle
F. Installation Weight & Dimensions
The approximate weight and dimensions differ depending on how the device The approximate weight and dimensions differ depending on how the device The approximate weight and dimensions differ depending on how the device
is configured with the optional accessories. The following table includes the is configured with the optional accessories. The following table includes the is configured with the optional accessories. The following table includes the
weight, width, height, and depth dimensions of the main engine and optional weight, width, height, and depth dime
accessories.
Table 18 – Weight Table
20
Main Unit
1 9 F
Duplex Color Image Reader-D1 Duplex Color Image Reader
Operator Panel
Operator Attention Light Operator Attention Light
ePIM-C1
Document Insertion Unit Document Insertion Unit-F1
Saddle Finisher-AF2
Finisher-AF1
High Capacity Stacker High Capacity Stacker-E1
High Capacity Stacker-F1 High Capacity Stacker
Paper Folding Unit-F1
Puncher Unit-BQ1
Booklet Trimmer-D1
Two-Knife Booklet Trimmer Knife Booklet Trimmer-A1
IMPORTANT
The floor on which this machine is installed must have strength of at least 450 The floor on which this machine is installed must have strength of at least 450 The floor on which this machine is installed must have strength of at least 450
kg/m² (92.2 lb/ft
building contractor before installing the machine. building contractor before installing the machine.
20 The Marking Engine, Fixing Unit, and Power Station Unit all make up what is hereinafter referred to as the "Main Unit." The Marking Engine, Fixing Unit, and Power Station Unit all make up what is hereinafter referred to as the "Main Unit." The Marking Engine, Fixing Unit, and Power Station Unit all make up what is hereinafter referred to as the "Main Unit."
Océ VarioPrint 135/120/110 Service Guide
Revision 3
Receptacle
VarioPrint 135/120/110 Main Unit
ePIM ePIM-C1 / Accessories / Finishers / PRISMAsync Controller
Weight & Dimensions
Table
Accessory
F1
2
). If the floor does not have this level of strength, consult your ). If the floor does not have this
Service Guide
Océ VarioPrint 135/120/110
NEMA 6-20 R
ISMAsync Controller
NEMA 5-15R
nsions of the main engine and optional
level of strength, consult your
/110 Service Guide
Approximate
Weight
580 lb 580 lb 263 kg
59 lb 59 lb 27 kg
9.3 lb 9.3 lb 4.2 kg
2.2 lb 2.2 lb 1 kg
441 lb 441 lb 200 kg
122 lb 122 lb 55 kg
396 lb 396 lb 180 kg
287 lb 287 lb 130 kg
463 lb 463 lb 210 kg
265 lb 265 lb 120 Kg
144 lb 144 lb 65 kg
8.2 lb 8.2 lb 3.7 kg
335 lb 335 lb 152 kg
319 lb 319 lb 145 kg
January 2013
Page 34