Paper Folding Unit-F1; Document Insertion Unit-F1 - Canon Oce VarioPrint 135 Service Manual

work surface or an off-line finishing device. The PowerLift includes
specially designed pallets for placing the stack on a work surface. The
PowerLift has a maximum lifting weight of up to 175 lb.
Notes:
1. The VarioPrint 135/120/110 requires PRISMAsync Firmware 2.4 to
use the High Capacity Stacket-F1.
2. The High Capacity Stacker-F1 and the High Capacity Stacker-E1
cannot be installed at the same time.
3. To sell the High Capacity Stacker-F1 and receive technical support,
the Servicing Dealer must have at least two (2) Service Technicians
complete the online update course for the High Capacity Stacker-F1.
Refer to the Canon USA
IMPORTANT
Canon USA highly recommends that service technicians provide
administrators/operators with safety instructions using the "Important
Notification of High Capacity Stacker-F1" sheet (See Appendix). The
notification sheet is included with the High Capacity Stacker-F1 and is
available in the Service Manual.

8. Paper Folding Unit-F1

The Paper Folding Unit-F1 enables the user to Z-fold, C-fold, Zigzag-fold,
and Double Parallel-fold paper for businesses that require letters,
invoices, or brochures to be folded. The Paper Folding Unit-F1 is installed
in before the Saddle Finisher-AF1/Finisher-AF2.

9. Document Insertion Unit-F1

This Document Inserter Unit-F1 provides users the ability to insert pre-
printed cover sheets or insert sheets for binding. There is an upper tray
and a lower tray with each having a capacity of up to 200 sheets. The
Document Insertion Unit-F1 supports Plain Paper, or Tab paper, paper
weights of 14 lb bond to 110 lb cover and a paper size of 7.2" x 7.2" to
13"x19.2". This unit can be installed with both the Finisher-AF1 and
Saddle Finisher-AF2.
Note: productivity will slow down while using this accessory.
Océ VarioPrint 135/120/110 Service Guide
Revision 3
Océ VarioPrint 135/120/110 Service Guide
Training Center for details.
e-Support
January 2013
Page 12