Cable Pinouts; Specifications: Ethernet Lan Interface; Miscellaneous - Nortel SR1001 Installation Manual

58
APPENDIX A
Specifications

Cable Pinouts

SR1001 Installation Guide
Version 8.3.5
Table 22 Specifications: Ethernet LAN Interface
Two 10/100 Base-T, 802.3 auto-negotiating, full or half-duplex
The following table provides information about service levels, protocols supported, and
management interface connectors.
Table 23: Miscellaneous
Service Levels and Connectivity
DS0
NxDS0
T1
E1
NxT1
NxE1
10/100 Base-T
Protocol Support
WAN
PPP
MLPPP
HDLC
Frame Relay
Multilink Frame Relay (MFR)
FRF.15 (End-to-End)
FRF.16 (UNNI/NNI)
Management Interfaces
Console: RJ-45
AUX: DB-9
The following tables provide cable pinout information for the console (RJ-45), Ethernet
(RJ-45), T1(RJ-48C), and modem (DB-9 to DB-9) or (DB-25 to DB-9) cables.
Table 24 Pinouts: Nortel-to-Terminal Console Cable (DB-9)
Nortel
DCE Pin Signal
1 data carrier detect
2 transmit data
3 receive data
4 data terminal ready
5 signal ground
6 data set ready
7 request to send
8 clear to send
9 not used
Workstation
Direction DTE Pin
<— 1
—> 2
<— 3
—> 4
<—> 5
<— 6
—> 7
<— 8
9
Secure Router Specifications
Pin 1
Pin 5
Pin 9
Pin 6
RS-232 DCE on DB-9 Female