Led And Port Descriptions - Nortel SR1001 Installation Manual

Table 4 LED and Port Descriptions (continued)
Port Description
DUP Indicates the type of
duplex mode
Power Indicates system power
status
Compact Flash Port for compact flash
module
Table 5 1001 Back-Panel Ports
Connector Description
WAN 1 WAN connection port. This port accepts cables with RJ-48C connectors.
Backup WAN An ISDN backup option is supported in releases 8.3 and higher. This option
provides a backup if the primary network connection is lost. This port
accepts cables with RJ-45 connectors.
FE 0 / 1 Ethernet LAN connection ports. These ports accept cables with RJ-45
cable connectors.
AUX Reverse telnet connection. This port accepts a cable with an RJ-45 cable
connector.
Console Console management port. This port accepts a cable with an RJ-45 cable
connector.
DC power 12 VDC power connection. This port accepts the 2 mm. power connector
on the DC power supply cable that ships with the 1002 router.
Color
Off = Half duplex
Green = Full duplex
Green = power on
Off = power off
—
9
SR1001 Installation Guide
Version 8.3.5