Elcometer CG60DL Operating Instructions Manual page 7

The UP arrow/SCAN key has two functions.
When the Model CG60 is in CAL or ALARM mode, press this key to increase numeric values on the display.
An auto-repeat function is built in, so that when the key is held down, numeric values increment at an
increasing rate.
When the Model CG60 is taking readings, this key switches SCAN measurement on and off.
See "Measurement options" on page 23.
The DOWN arrow/Backlight key has two functions.
When the Model CG60 is in the CAL or ALARM mode, press this key to decrease numeric values on the
display. An auto-repeat function is built in, so that when the key is held down, numeric values decrease at an
increasing rate.
When the Model CG60 is taking readings, the DOWN arrow key switches the display backlight between three
settings; on, off and auto.
See "Backlight" on page 27.
The ALRM key has two functions.
Hold down the ALRM key when switching on the Model CG60 to switch the audible beeper on or off.
When the Model CG60 is taking readings, press the ALRM key to toggle the alarm on or off, and to allow the
nominal thickness value to be adjusted.
See "Alarm" on page 24.
The DUAL/MULTI key toggles between pulse-echo measurement mode and echo-echo measurement mode.
DUAL
This enables the user to switch very conveniently between measurement modes depending on application
MULTI
requirements.
See "Measurement options" on page 23.
The SEND key sends the currently displayed thickness measurement to an external storage device via the
RS232 port.
See "Transferring readings to a computer" on page 31.
5