Omron CS1W-ETN01 Operation Manuals page 127

Using Socket Services with Socket Service Request Switches
Program Memory Map
CIO 0000
CIO 0001
CIO 0002
• CIO 000003 is turned ON to request receiving data from the Ethernet Unit. The
data that is received (100 bytes) is stored beginning at D01000.
• One of the bits between CIO 000100 and CIO 000103 will turn ON if an error
occurs. Refer to 6-2-2 Response Codes for information on errors.
The send and receive data and bits (flags) used by the program are shown in the
following diagram.
DM Area
CIO Area
The following bits and flags are used to control CMND(490) execution. The bits
in CIO 0000 are used to signal execution, the bits in CIO 0001 are used to signal
errors, and the bits in CIO 0002 are used to control the program so that the
instruction is executed only once.
7 6
15 to 8
Send data, 100 bytes (100 = 0064 Hex)
Receive data, 100 bytes (100 = 0064 Hex)
5 4 3 2
TCP TCP
Receive Send
Bit Bit
TCP TCP
Receive Send
Error Error
Flag Flag
TCP TCP
Receiving Sending
Flag Flag
Section 6-2
1 0
TCP TCP
Close Open
Bit Bit
TCP TCP
Close Open
Error Error
Flag Flag
TCP
TCP
Opening
Closing
Flag
Flag
115