How To Identify Your System Type - Danfoss ECL Comfort 110 User Manual, Installation & Maintenance

How to identify your system type

The ECL Comfort controller is a universal controller that can be used for various systems.
Based on the shown standard systems, it is possible to configure additional systems.
In this section you find the most frequently used systems. If your system is not quite as
shown below, find the diagram which has the best resemblance with your system and
make your own combinations.
Heating system 1:
District heating circuit with heat exchanger
Heating system 2:
Boiler-based heating circuit
40 VI.KT.G2.02
© Danfoss 05/2007 DH-SMT/DK
Adapting the ECL Comfort 110 controller
When you switch on the controller the first time, it will ask you to choose language
(default language is English).
��������
� � ��������
Choose your language.
Accept and go to the next menu.
When the language is chosen, the controller will ask for date and time setting.
�����������
��������� � �������
Set day (dd), month (mm), year (yy), hour (hh), and minuts (mm).
Change values.
Accept the chosen time and date.
When the language has been chosen, and date and time have been set, the controller
will ask for application type.
�����������
����� � �� ����
Choose application type.
2 sec.
Start the chosen application.
Go to the 'Maintenance' part for further setup of your controller.
VI.KT.G2.02
DH-SMT/DK © Danfoss 05/2007
41