Installation / Service Support Tools - Canon imageprograf IPF6400S Service Manual

Table 6 - Estimated Installation Times
imagePROGRAF iPF6400S Main Unit (with
Stand)
Printhead PF-05 (x2)
Ink Tanks (time includes installation of all eight
(8) ink tanks)
Starting from an unpacked condition, installation times shown in
above are the estimated times required for installation. They are calculated
based on man-hours.
F.

Installation / Service Support Tools

The tools required to mutually support these printers are in the Table
below.
Table 7 - imagePROGRAF iPF6400S Installation Tools
Hexagonal wrench (Provided with the printer
stand)
Cut sheet paper A3 size or larger, or roll paper
Cutter
In addition to the standard tools used to service this device, the following
special tools, solvents, & oils should also be carried when servicing the
imagePROGRAF iPF6400S.
Table 8 - Special Tools, Solvents, & Oils List
Tool/Description
Cover Switch Tool
Syringe
Tube
Grease PG-5000H
Rubber gloves
Silbon paper
Pen flashlight
1
Item Numbers and Part Numbers are subject to change due to engineering changes, etc.
imagePROGRAF iPF6400S Service Guide
Description
Tool
Part Number
QY9-0103-000
CK-0541-000
QA2-6161-000
CK-0562-000
QC1-5547-000
CK-0336-000
CK-0327-000
imagePROGRAF iPF6400S Service Guide
Estimated Time
25 minutes
5 minutes
25 minutes
Use
For assembling stand and removing the fixed
parts
For test print after confirming printer operation
For unpacking
1
Use
For activating the cover switch
For draining ink manually
For draining ink manually
For applying to places specified in the
Service Manual (Successor to Molycote)
Use for cleaning and to prevent from dirtying
the hands
For cleaning
For locking/unlocking the carriage
Table 6
September 2013
Page 16