Installing; Mounting - Bosch AMC2 Installation Manual

AMC2 Wiegand
Extension
4

Installing

Notice!
To build an UL approved system refer the documentation
contained in the folder titled "_UL" on the delivered CD.
4.1

Mounting

The AMC2-4WE can be attached on a standard 35 mm
(1.377 in.) mounting rail using a snap-in mechanism. Attach the
AMC2-4WE into the upper edge of the mounting rail [1], then
push down the device and snap it onto the rail by pushing it
towards the back [2].
Figure 4.1: Mounting the AMC2 device on a mounting rail
Bosch Sicherheitssysteme GmbH
Installing | en 19
2016-11 | AMC2-4WE |