Search Method - Radio Shack TOUCHSCREEN REMOTE Owner's Manual

QUICK START GUIDE (CONTINUED)
• I
F YOUR DEVICE DOES NOT RESPOND
EACH CODE LISTED FOR YOUR BRAND
YOUR BRAND OPERATE YOUR DEVICE
12.
PAGE
• S
OME CODES ARE QUITE SIMILAR
OR IS NOT FUNCTIONING PROPERLY WITH ONE OF THE CODES
ANOTHER CODE LISTED UNDER YOUR BRAND
• I
F THE ORIGINAL REMOTE CONTROL DID NOT HAVE A
PLAY
PRESS
• W
RITE YOUR CODE IN THE BOXES PROVIDED ON PAGE
EASY REFERENCE
S M
EARCH ETHOD
If your device does not respond to the remote
after trying all codes listed for your brand, try
manually searching for your code. The Search
Method allows you to find the code for your
device by scanning through all the codes con-
tained in the memory of the remote. The Search
Method may also work if your brand is not listed
at all.
T
O SEARCH FOR YOUR
1. Switch your Television on (not on standby).
2. Press TV.
3. Aim the remote at your television. Hold down P
for at least 3 seconds. The bottom of the IR
Indicator blinks twice, and a circle appears
around P.
4. Press 9 9 1. The bottom part of the IR Indicator
blinks twice.
5. Press POWER. If the TV turns off, you have
found your code. If not, press the TV key to
cycle to the next code, and press POWER again.
Repeat this process until you find the code that
turns off your TV.You may have to repeat this
sequence many times so please be patient.
Remember to keep pointing the remote at your
television while pressing these keys.
6. When your television switches off, press P to
store the code.
Now your remote is ready to control your
television.
12 Quick Start Guide
POWER
INSTEAD OF
.
TV
6- -O
IN NE
,
FOLLOW STEPS
. I
F NONE OF THE CODES LISTED FOR
,
THEN TRY
. I
F YOUR DEVICE DOES NOT RESPOND
.
DURING STEP
:
CODE
1
THROUGH
"S M
EARCH ETHOD
,
TRY
POWER
5.
26,
FOR QUICK
6
WITH
"
ON
,
KEY
,