Samson 3730-4 Mounting And Operating Instructions page 137

Physical Block, Slot 0 · Profile-specific parameters
Description
Describes the optional features integrated into the device as well as the existence and state of the features.
Note! The structure for Supported and Enabled are identical!
Default Description
. . . 1 Status and diagnostics complying with condensed state profile extension
. . . 1 Status and diagnostics according to Profile 3.01
. . . 0
. . . 0
Hardware version (electronics/mechanics)
Indicates the position of the write protection switch on the device.
Used to select the ID number
. . . GSD file: PA139710.GSD
. . . GSD file: SAMS071D.GSD
Local operation enabled
If communication fails for a time longer than 30 seconds, local operation will be enabled automatically
Indicates the actual mode.
Contains the firmware version (communication/control).
Indicates the revision level of static data.
This parameter is used to group blocks for their faster analysis.
Blocks are grouped by entering the same value in the STRATEGY parameter of each block.
Used to enter a user-selected text to identify and assign blocks.
Desired mode of operation
Collective command allowing a group of parameters to be read with one single read-service.
Software write protection
Appendix
.
137
EB 8384-4 EN