(T Type) - Honda BF75A Owner's Manual

OPERATION (T type)
Moorage
Tilt up the outboard motor using the
tilt lock lever when mooring the boat.
Shift the control lever into the
NEUTRAL position and stop the
engine before tilting up the outboard
motor.
92
TILT LOCK LEVER
FREE
LOCK
STERN BRACKET
1. Raise the motor as far as it goes
using the power trim/tilt switch.
2. Move the tilt lock lever to the
LOCK position and lower the
outboard motor until the lock lever
contacts the stern bracket.
Hold the engine cover grip and lift
3.
the motor slightly to swing the tilt
lock lever into the lock position.
4. To tilt down, raise the outboard
motor slightly, move the tilt lock
lever to the FREE position, and
lower the outboard motor to the
designated position.
POWER TRIM/TILT SWITCH
(LEFT) (RIGHT)
When the boat is mounted with the
two outboard motors, tilt up the right
and left outboard motors one by one
using the switch on the control lever
side. Set the tilt lock lever of one
outboard motor at the LOCK position,
then tilt up another outboard motor.
After tilting down the outboard
motors, adjust the trim angle of the
right and left outboard motors using
the switch on the control lever side.