Over-Rev Limiter; Anodes - Honda BF75A Owner's Manual

COOLING WATER INTAKE PORT
3. If the overheat warning system
stays activated, stop the engine.
Tilt up the motor and check the
water intakes for obstructions. If
there are no obstructions at the
water intakes, return to the closest
boat landing and contact your
closest authorized Honda outboard
motor dealer.
〈

Over-rev Limiter

〉
This outboard motor is equipped with
an engine over-rev limiter which
activates when the engine speed
increases excessively. The over-rev
limiter can be activated while
cruising, tilting up the motor, or
when ventilation occurs during a
sharp turn.
When the over-rev limiter is
activated:
Reduce the throttle opening
1.
immediately and check the trim
angle.
2. If the trim angle is correct but the
over-rev limiter stays activated,
stop the engine and check the
condition of the outboard motor
and check the propeller for
damage.
Correct or service as necessary, by
contacting your authorized Honda
outboard motor dealer.
OPERATION
〈

Anodes

〉
ANODE
(each side of extension case)
The anodes are a sacrificial material
which helps to protect the outboard
motor from corrosion.
Painting or coating the anodes will
lead to rust and corrosion damage
to the outboard motor.
There are also 2 small sacrificial
anodes in the water passages of the
engine block.
ANODE
(stern bracket)
97