(R2, R3 Type) - Honda BF75A Owner's Manual

(R2, R3 type)

EMERGENCY STOP SWITCH
SWITCH PANEL
EMERGENCY STOP
SWITCH LANYARD
EMERGENCY STOP SWITCH CLIP
The exhaust contains
poisonous carbon monoxide.
Do not start the engine in a
poor ventilation area such as in
a boat house.
To prevent damage to the
outboard from overheating, never
run the engine with the propeller
out of water.
When the boat is mounted with the
two outboard motors, perform the
following on the right and left
engines respectively.
1. Insert the emergency stop switch
clip at one end of the emergency
stop switch lanyard into the
emergency stop switch. Attach the
other end of the lanyard to the
operator's wrist securely.
If the operator does not attach
the emergency stop switch
lanyard, and is thrown from his
seat or out of the boat, the out-
of-control boat can seriously
injure the operator, passengers,
or bystanders. Always properly
attach the lanyard before
starting the motor.
The engine does not start unless the
clip is set on the emergency stop
switch.
STARTING THE ENGINE (R type)
A spare emergency stop switch clip is
provided in the tool bag. Use the
spare clip to make the emergency
engine start when the emergency stop
switch lanyard is not available as, for
example, the operator falls outboard.
SPARE EMERGENCY
STOP SWITCH CLIP
65